https://ameblo.jp/aimeesky/ ブログの説明を入力します。 ja steam curing autoclave reactor or autoclave reactor, is a large pressure vessel equipment, the autoclave (steam curing kettle) silicate building products , but also used in chemical, pharmaceutical, rubber, wood, plaster , glass, insulation materials, textile workers, military and other fields of products, steam curing. Can be used for steam-cured sand lime brick, fly ash brick, slag brick, aerated concrete block, cement pipe, glass processing, wood, rubber, insulation materials, pharmaceuticals, high-strength gypsum, fishnet stereotypes and other industries.
Autoclave structure in the form of steel horizontal cylindrical design, the overall 16Mn steel kettle cover with repression, kettle body flange, tank cover flange are made from whole 16Mn forging. Weld pressure parts according GB150-1998 "Steel Pressure Vessels" strict industry standards such as X-ray non-destructive testing and heat-treated products supporting the well-equipped with safety valve, pressure gauge, temperature measurement devices, into the exhaust valve, sealing ball valves, steam traps and other valves and instrumentation, using manual or computer control.
Autoclave door Open the door using the activity structure by hand gear for opening and closing, can also be based on user requirements with electric, pneumatic, hydraulic hoist. The device is equipped with perfect safety interlock protection device, the maximum to avoid the misuse problems, to ensure the safe operation of the autoclave and operator safety. Ax with side opening door opening and on the form to open two forms for users to choose. Side-opening door with rotating arm structure, flexible rotation, low operation simple and convenient open; - open door using the lever mechanism, lever connected to the lower end of the autoclave door, top with weight equipment, which forms open light, kettle side small space.
Autoclave Features:
First, the autoclave processing of teeth, in strict accordance with industry standards, autoclave kettle teeth should be milling out, the advantage is even by force, not easily deformed, use them in the future, flexible operation.
Second, dual roller Niagara reed way, the rollers and tension spring underneath the floor to prevent shifting kettle body thermal expansion and contraction.
Third, the distribution ribs to strengthen the tendons in the autoclave discharge gas, the temperature drop, to prevent the kettle body contraction.
Fourth, the rail by the plate and the pressure plate to the fixed plate after finishing.
Five, sealed worse, kettle body blue hair twice a vapor seal worse, the current market, there are two, one is a single body, one is a picture-shaped, should be selected picture shape, good sealing performance, easy to damage seals .

]]> https://ameblo.jp/aimeesky/entry-11596150242.html Tue, 20 Aug 2013 12:35:34 +0900 Conform to good economic environment, a Malaysian company to continue to expand production of pipe production capacity, to my company bought six φ3.2x26.2m autoclave and two 15t / h industrial boiler for pipe production, was expanded production capacity of 400 million meters, sixteen consecutive years ranked in the same industry production and sales champion in 2010 is to reach 100 million meters, in China's manufacturing prestressed concrete piles in a leading position.
The production line equipment including line pipe mold, tensioned Five-piece, mixing batching system, mixing, automatic tensioning machine, automatic centrifuge, steam curing pool cover, autoclave, autoclave trolleys, double girder double trolley bridge cranes, automatic spreader, fabric platform trucks, cloth cars, drawing cars, Pointing Machine, on the wire machines, automatic cutting machine, heading machine, roll welding, screw air compressor, circulating fluidized bed boilers.
Customers using my company's autoclave and industrial steam boilers Two years later, the reaction autoclave and industrial boilers, stable quality, easy to use, small amount of maintenance, is commendable good product!

]]> https://ameblo.jp/aimeesky/entry-11593609472.html Fri, 16 Aug 2013 11:51:24 +0900 steam curing autoclave reactor or autoclave reactor, is a large pressure vessel equipment, the autoclave (steam curing kettle) silicate building products , but also used in chemical, pharmaceutical, rubber, wood, plaster , glass, insulation materials, textile workers, military and other fields of products, steam curing. Can be used for steam-cured sand lime brick, fly ash brick, slag brick, aerated concrete block, cement pipe, glass processing, wood, rubber, insulation materials, pharmaceuticals, high-strength gypsum, fishnet stereotypes and other industries.
Autoclave structure in the form of steel horizontal cylindrical design, the overall 16Mn steel kettle cover with repression, kettle body flange, tank cover flange are made from whole 16Mn forging. Weld pressure parts according GB150-1998 "Steel Pressure Vessels" strict industry standards such as X-ray non-destructive testing and heat-treated products supporting the well-equipped with safety valve, pressure gauge, temperature measurement devices, into the exhaust valve, sealing ball valves, steam traps and other valves and instrumentation, using manual or computer control.
Autoclave door Open the door using the activity structure by hand gear for opening and closing, can also be based on user requirements with electric, pneumatic, hydraulic hoist. The device is equipped with perfect safety interlock protection device, the maximum to avoid the misuse problems, to ensure the safe operation of the autoclave and operator safety. Ax with side opening door opening and on the form to open two forms for users to choose. Side-opening door with rotating arm structure, flexible rotation, low operation simple and convenient open; - open door using the lever mechanism, lever connected to the lower end of the autoclave door, top with weight equipment, which forms open light, kettle side small space.
Autoclave Features:
First, the autoclave processing of teeth, in strict accordance with industry standards, autoclave kettle teeth should be milling out, the advantage is even by force, not easily deformed, use them in the future, flexible operation.
Second, dual roller Niagara reed way, the rollers and tension spring underneath the floor to prevent shifting kettle body thermal expansion and contraction.
Third, the distribution ribs to strengthen the tendons in the autoclave discharge gas, the temperature drop, to prevent the kettle body contraction.
Fourth, the rail by the plate and the pressure plate to the fixed plate after finishing.
Five, sealed worse, kettle body blue hair twice a vapor seal worse, the current market, there are two, one is a single body, one is a picture-shaped, should be selected picture shape, good sealing performance, easy to damage seals .

]]> https://ameblo.jp/aimeesky/entry-11592964883.html Thu, 15 Aug 2013 11:17:33 +0900 Boilers as an energy conversion device, in life, industrial production, thermal power plants, ships, locomotives, and have applications in industrial and mining enterprises. Boilers are durable and often use several decades, so we must be careful to buy the boiler. Here are a few from experience for your reference.
Ⅰ. the quality of the boiler
Security: 1. failure, whether in time off the gas valve. Is currently the best security protection with two gas valves, safety valves between two mutually monitor each other's status. 2. will delay the ignition. If the ignition delay, the light will produce deflagration, in serious cases may explode (Of course, this is a rare occurrence). Therefore, when the boiler in the election must choose large companies, high-tech company produces boilers.
Stability、reliability: 1. Igniter success rate. 2. firing a high success rate, temperature sensors and control elements of high sensitivity, so as to ensure a constant water temperature.
Perfect protection function: If frost protection, leakage protection, overload protection, low water pressure or water protection and so on.
Powerful fault self-test function: This is very favorable for maintenance.
The level of thermal efficiency: little difference between the current boiler.
Convenience: There is no regular fixed temperature function, operation is convenient.
Ⅱ. the boiler of the brand is not well-known brands, there is no sound service system and accessories, as a boiler of at least ten years with as many as twenty years, so the service is very important, I believe that every customer reluctant to buy in the future nobody no accessories boilers.
Ⅲ. choose a good technology, good workmanship, good reputation, good service and make you feel comfortable with the company.
Ⅳ. the price. Of course, the higher the better value for money
ZG is a large state enterprises, the former Ministry of Machinery boiler manufacturing of key enterprises, is the Midwest's largest boiler manufacturers, with the highest level of China A-class boiler manufacturing boiler manufacturing license and three types of pressure vessel design and manufacture license.
The company has consistently adhered to the "leading technology, quality first" principle, attaches great importance to technology transfer and new product development, with many domestic scientific research institutes horizontal cooperation of all long-term relationship, such as Chinese Academy of Sciences, Tsinghua University, Xi'an Jiaotong University, Huazhong University of Science and Technology, Shanghai Institute of Mechanical Engineering and so on. Company's technology center has been identified as provincial-level technology center, the company was named the first batch of Zhengzhou research base. Relying on strong technical strength, the company obtained many awards a variety of products, renowned domestic.
ZG has high value product quality, depending on the quality of corporate life, once in 1999 and passed the ISO9001 international quality system certification, the China Certification Committee for Quality Mark Quality Certification Center of Quality System Certification. Enterprise also won the Ministry of Machinery Equipment Management Excellence Award, Henan Province Quality Management Award, the National boiler industry user rating "quality, reputation and service" Best Award honors.
Currently, ZG from product development, design, manufacture, installation, support and sales services for the whole process, maturing, with strong market competitiveness and business resilience. In the market economy, Zhengzhou Boiler Co.,Ltd. known for its strong, high-quality products, a trusted service, firmly based on our boiler industry of the forest.

]]> https://ameblo.jp/aimeesky/entry-11592375425.html Wed, 14 Aug 2013 11:54:19 +0900 steam curing autoclave reactor or autoclave reactor, is a large pressure vessel equipment, the autoclave (steam curing kettle) silicate building products , but also used in chemical, pharmaceutical, rubber, wood, plaster , glass, insulation materials, textile workers, military and other fields of products, steam curing. Can be used for steam-cured sand lime brick, fly ash brick, slag brick, aerated concrete block, cement pipe, glass processing, wood, rubber, insulation materials, pharmaceuticals, high-strength gypsum, fishnet stereotypes and other industries.
Autoclave structure in the form of steel horizontal cylindrical design, the overall 16Mn steel kettle cover with repression, kettle body flange, tank cover flange are made from whole 16Mn forging. Weld pressure parts according GB150-1998 "Steel Pressure Vessels" strict industry standards such as X-ray non-destructive testing and heat-treated products supporting the well-equipped with safety valve, pressure gauge, temperature measurement devices, into the exhaust valve, sealing ball valves, steam traps and other valves and instrumentation, using manual or computer control.
Autoclave door Open the door using the activity structure by hand gear for opening and closing, can also be based on user requirements with electric, pneumatic, hydraulic hoist. The device is equipped with perfect safety interlock protection device, the maximum to avoid the misuse problems, to ensure the safe operation of the autoclave and operator safety. Ax with side opening door opening and on the form to open two forms for users to choose. Side-opening door with rotating arm structure, flexible rotation, low operation simple and convenient open; - open door using the lever mechanism, lever connected to the lower end of the autoclave door, top with weight equipment, which forms open light, kettle side small space.
Autoclave Features:
First, the autoclave processing of teeth, in strict accordance with industry standards, autoclave kettle teeth should be milling out, the advantage is even by force, not easily deformed, use them in the future, flexible operation.
Second, dual roller Niagara reed way, the rollers and tension spring underneath the floor to prevent shifting kettle body thermal expansion and contraction.
Third, the distribution ribs to strengthen the tendons in the autoclave discharge gas, the temperature drop, to prevent the kettle body contraction.
Fourth, the rail by the plate and the pressure plate to the fixed plate after finishing.
Five, sealed worse, kettle body blue hair twice a vapor seal worse, the current market, there are two, one is a single body, one is a picture-shaped, should be selected picture shape, good sealing performance, easy to damage seals .

]]> https://ameblo.jp/aimeesky/entry-11591748831.html Tue, 13 Aug 2013 11:42:30 +0900 DHL series of chain grate boiler for ZG group introduced from Xi'an Jiao Tong University boiler research with Chinese characteristics of the second generation of large capacity stoker fired chain grate boiler energy-saving products. This type of chain grate boiler is widely used in schools, textile factory, garment factory, printing and dyeing factory, restaurant, food factory, beverage factory, bean products, meat products, canned food factory, brewery, pharmaceutical factory, packing factory, building materials factory, paint factory, swimming pool and other enterprises and institutions place. Has the advantages of reliable water cycle, high combustion efficiency, low pollutant emission.

The chain grate boiler with "high temperature separation of fly ash in circulating fluidized reburning device" and other three invention patents and two utility model patents based on. The following relevant patent technology: high temperature separation of fly ash in circulating fluidized reburning device, based on Patent No.: 200610043133.2; type boiler flag type convection heating surface recombination velocity design method, angle pipe patent number: 200610043132.8.

The boiler has the advantages of high thermal efficiency, low operation cost, long-term trouble free operation, concentration of boiler outlet low smoke discharge, light weight, less investment, is the factory, on-site installation workload is small, short cycle installation etc., is a large capacity boilers in China the new replacement product.

]]> https://ameblo.jp/aimeesky/entry-11591125073.html Mon, 12 Aug 2013 12:03:03 +0900 Aerated concrete first appeared in the Czech Republic, 1889, Hoffman (Hofman) sodium salt made of aerated concrete manufacturing patents. In 1919, Berliners Gro sand (Grosahe) made with a metal powder as gas agent system out of aerated concrete, in 1923, the Swedes Exxon (J.Eriksson) with aluminum mastered the production of gas agent for the hair technology and obtained a patent. Send gas to large gas production of aluminum powder, produced by a small amount of hydrogen dissolved in water, it is made of high efficiency gas, gas evolution process is also relatively easy to control, aluminum wide source, so as aerated concrete provides a large-scale industrial production important conditions. Since then, with the right technology and equipment, continuous improvement, industrial production has become more sophisticated, and finally in 1929, first in Sweden established the first aerated concrete plant. From the beginning of industrial production of aerated concrete has less than seven years of history, aerated concrete industry has been greatly developed, not only in Sweden, formed a "Yitong (Ytong)" and the "West Lieke Si (Siporex)" two patents and the corresponding number of factories, but also in many other countries have also introduced their own production technology or production technology research and development, especially in some cold climate countries such as Norway, the Netherlands, Poland, Denmark and other countries, their successful research production technology, the formation of a new patent. Such as Germany HYPOR (Hebel), the Netherlands seeking Laux (Durox), Poland, Ukraine Nepal (Unipol) and Denmark Division Tima (Stema). Before World War II, aerated concrete only in a few Nordic countries promote the application, and now, whether it is cold region, or the hot zone near the equator, production and application have been more than 60 countries across five continents.
ZG produced industrial autoclave professional products business. absorption of foreign products advantages, combined with the actual use of domestic users, design, production, manufacturing and R & D level in the same industry-leading level at home and abroad, reliable quality assurance. Meanwhile, the company is the country's best corporate reputation for quality appraisal business users in china. outstanding quality management company, is worthy of the trust of users of high-quality companies.

]]> https://ameblo.jp/aimeesky/entry-11589424373.html Fri, 09 Aug 2013 17:53:18 +0900 Aerated concrete as a new building material, lightweight, energy-saving section of soil, insulation, waste utilization, fire, economic and easy processing, etc., do walls, floors and other load-bearing and non-load-bearing materials, filling materials, widely used in industrial plants and civil construction. Do you know aerated concrete production processes? ZG Vessel details for you.
(1) Preparation of raw materials, mainly for bulk processing of lime and sand. After massive limestone crusher for crushing; small block made of powdered lime through ball.
(2) after the wet sand, made the slurry.
(3) the storage of raw materials by measuring the ingredients.
(4) pouring the ingredients into the mixer after the mixture was stirred to prepare a slurry.
(5) Stir the slurry after pouring into the mold.
(6) after a certain pre-raising time and temperature, until the green body to a certain hardness, cutting is ready.
(7) Flip spreader to make molds and body separated, and lifting the body together with the side panels to cut small car, flip the mold spreader for 90-degree flip in the air, the green body longitudinal and transverse vertical horizontal cutting .
(8) diced green body with side panels together by a semi-spreader hanging grouped into steam curing car, waiting into the autoclave steam curing.
(9) into the autoclave under pressure at a temperature and for autoclave curing the green body.
(10) in the autoclave steam curing is complete, the finished product out of the autoclave, and then stacking and packaging.
(15) loading the finished package shipping.
(16) side via the return system to return.
(17) side after a good combination with the mold box, to clean oiled.
(18) of the mold after cleaning, the recovery system, transported to the designated location, wait for the next casting.
ZG Vessel is a production of aerated concrete production equipment required for steam curing - autoclave and industrial steam boiler manufacturers. ZG production of industrial boilers for nearly six decades of history, has an excellent reputation among users, the company produced autoclave and industrial boilers exported to Southeast Asia, North Asia and Eastern Europe and other countries, by the international user acceptance.

]]> https://ameblo.jp/aimeesky/entry-11587970510.html Wed, 07 Aug 2013 12:54:51 +0900 Pneumatic door autoclave system is simple, but also to achieve low operation can also be remote operation, open light, by adjusting the air pressure and flow, enabling infinitely variable speed, smooth operation, a safety interlock device, easy to operate, safe and reliable, can be completely achieve operational automation.
Pneumatic cylinder gas source may be required to provide air compressors, but also to keep the work environment clean, in the traditional sense, we tend to feel less pressure system forces generated by the hydraulic system, the volume slightly. But this time we put pressure system on the 2.5-meter diameter autoclave, autoclave reactor can achieve door switch freely. These people have enough to explain Zheng guo to break tradition and innovative spirit, we have been manufacturing products Open the door to a very high level of expertise.
We believe that this open system, will soon become the other innovative way to open the door. Zheng guo autoclave once again walk in the forefront of technological innovation, once again walk in the forefront of the times.

]]> https://ameblo.jp/aimeesky/entry-11584143069.html Thu, 01 Aug 2013 11:16:38 +0900 autoclave manufacturers, the timely grasp of market trends autoclave is very important, in the present competitive market, companies need to stand out distinctive style, the courage to change, good at innovation , so as to fundamentally change and enhance the product's capabilities, thus achieving breakthrough development.
Autoclave is light brick production process the necessary equipment, but also one of the large special equipment, in using it to pay attention to safe operation, the operator should be familiar with the process, to maintain smooth hydrophobic, in addition to withstand steam autoclave also bear the pressure of the formation of steam curing cart and product weight load form the condensate tank tops and bottoms be stable difference between the formation of stress, long-term use in this stress will make it reduces the strength autoclave lose some strength, water and gas corrosion can cause the material strength.

Autoclave used to be discharged condensate, the initial stage of heating the autoclave will have a lot of condensation water will be discharged if no bottoms together to form low temperature zone, resulting in larger temperature difference between the upper and lower reactor body, causing up and down over large stress difference and thermal deformation difference.
The power of innovation is the soul of an enterprise survival, the autoclave was the birth of the great products of science and technology to the user demonstrated his impressive side, technological innovation is the driving force of progress, the level of production technology is also part of the enterprise in the domestic innovation efforts, the leap was able to obtain progress in the future, Which companies can have a more advanced ability to innovate, also bound in this industry is growing.
]]> https://ameblo.jp/aimeesky/entry-11583482323.html Wed, 31 Jul 2013 10:43:49 +0900