Battery Chemistry

(Li-ion battery)

Model

Power-Pond-2C

Input

DC 5V/2A

USB output

5.0±0.25V/2.0A(MAX)

Capacity

4000mAh

Size

90*46*25.5mm

Weight

≦130g

Color

White

Charging Time

3-5 hours

Rechargeable

up to 500 times

Safe charge

Overcharge, over-discharge and short circuit protection

Runtime

7-8 times longer than general mobile battery （Runtime depends on digital part’s model, configuration and work condition ）

POWER-POND-2C Series:

POWER-POND-2C have 5 models，different capacity and diversity configuration could meet your different needs
POWER-POND-2C-4000(mAh)
POWER-POND-2C-4400(mAh)
POWER-POND-2C-4800(mAh)
POWER-POND-2C-5200(mAh)
POWER-POND-2C-6000(mAh)

Fit models

Suitable for 3C digitals:

Built-in Dual USB output plugs, combined with various transit connector can be used in all device that comes with voltage of 5 500ma -1000ma. Such as Ipad, Ipod ,Iphone ,and kinds of smartphone; General mobile, Digital Camera. Telecamera, PSP, NDSI,PDA, MP3 ,MP4,GPS,UMPC and Bluetooth etc.

Feature

1. Most Mini size，It’s the smallest size among the same capacity grade.

2. Excellent Value，Highest capacity among the same grade even the size is the smallest.

3. Fast Charging : We designed 2A big current charger to make your Power-Pond fully charged easily 3-5 hours.

4. The original company who use plastic two colors casting with delicacy and beautiful appearance.

5. The original company who take “Power-Pond “10 letters to showing the capacity by LED Light. And LED light could precise indicate power..

6. Most high performance: Made by import Panasonic, Sanyo, Samsung highly capacity cell，Rechargeable time up to 500 times。

7. Most complete Accessories， with 6-10 sets portable accessories which can charge mainstream brand mobile and other 5V/2A device.

Instruction

一、 The instruction of charging Mobile phone and Digital parts.

1. Power testing：

a. Press mobile power start key, Blue LED light show the current battery capacity .

b. Press mobile power start key, Blue LED light scintillation means low power

c. Press mobile power start key ，LED Light no showing , means the power used out or the goods defective.。

2. Charging for Mobile phone ,digital parts:

a. This models have two USB output port, which can charge two kinds of digital parts. And the sum of 2 output interface output current max is 1A.

b. Please use USB flexible cable’s central connector combine to suitable mobile’s transit connector, then plug mobile’s charge interface. Finally use flexible cable’s big USB interface plug to one of USB on Power-Pong which mark“ OUT” .

c. Press the mobile power start key, start output, then the mobile shows charging.

3. When Mobile ,digital parts fully charged, please unplug the mobile power output cable .

4. Click power showing button, Power-Pond begin to start output and showing power, then click again that means close output and power. When low power, parts can’t start output。

二、 Charge power-pond

1. Charging by computer USB：Accessories specific to the USB connector plugged in charging transit connector into the charging port. Another side combined with computer USB port to start charge. The blue light would circulating glow when charging. Fully charged, blue light bright.

2. Using mobile USB or DC 5V charger charging. the charger should link to USB connecting wire, and specific charging transit connector needed plug to the Power-pond charging interface, the another side connect combine with outlet. The blue light would circulating glow when charging. Fully charged, blue light bright.

Caution

1、 please full charged when first using.

2、 Mobile would have priority to use the power-pond capacity when mobile and power-pond combined.

3、 When mobile full charged , please unplug power-pond output line ,avoid wasting power.

4、 When using Power-pond , please open the screen of mobile in order to charge link is ok and make sure power-pond normally work.

5、 When charging of mobile, Power-Pond’s blue power light glow , that means power-pond low power, need charging.

6、 Charging power-pond or using power pond charge, please use the USB flexible cable and transit connector which attached to Power-pond, to avoid use of other connector cable and connector to use failure.

Choose Reason

1.Most Mini size，It’s the smallest size among the same capacity grade.

2.Excellent Value，Highest capacity among the same grade even the size is the smallest.

3.Most high performance: Made by import Panasonic, Sanyo, Samsung highly capacity cell，Rechargeable time up to 500 times.

4，Ultra fast charging，Designed 2A big current charger to make your power-pond fully charged 3-5 hours 。

5，Most complete Accessories， with 6-10 sets portable accessories which can charge mainstream brand mobile and other 5V/2A device.

Packing List 

APPLE type set

Power-pond ×1；APPLE charging cable ×1；USB data ×1；Mirco connector×1；
Instruction×1。

Warm Tips

Note：Please don't put power-pond in bag when charge mobile , due to bag sealed ventilation and thermal poor lead to Power-Pond and Mobile fever and would reduce the work life of Power-Pond & Mobile. Surely it maybe damage power-pond and Mobile. So kindly advice user please lay the goods in the ventilation or air-conditional environment charge.

At the same, charge Power-Pond have two ways, one is plugged in computer USB interface .the other is plugged in appliance. Please not plug in outlet on the wall when charged, because the transfer wire of power-pond only 20cm could lead to broke power-pond. thanks!

Warranty

Three kinds of warranty for this products strictly according to National standards. From the date of purchase, products quality problem (damaged caused by not human ), products changed in 15 days by warranty books, free repair service in a year.