https://ameblo.jp/homefurniture/ ブログの説明を入力します。 ja There are many inflatable products manufacturers, product quality and the prices are a bit confusing. How to buy desirable products is the problem that the majority of users are concerned about. Now we will introduce a little common sense about inflatable products for your reference.


1. Now inflatable products manufacturing enterprises in the market mostly use the network marketing, product strengths and weaknesses cannot be seen, therefore it is difficult to compare and choose. It is recommended to buy the bulk Inflatable Games, or manufacturers that just begin inflatable products business, you can first go to the manufacturers for a fieldwork. Reorder after understanding enterprise credit and products.


2. Try to choose to buy new products. On the one hand, the modeling should be new; On the other hand, the process should be new. Then you would have a better return on the market.



3. When selecting a product, you should consider the return and then look at the price. Under normal circumstances, the life of the inflatable products is in 2-3 years, the purchase is just a one-time investment. Good benefit may be able to recover the cost in three - six months; if you purchase inferior Custom Inflatables products, because you cannot get good market returns, the cheap products are rubbish. Low price products will likely be shoddy, raw materials cannot reach the technical indicators, processing technology is rough, and does not consider the after-sales service.


4. In the choice of products, firstly look, secondly touch and thirdly ask.


Look: look at the overall shape, processing technology, the color matching.
1) The overall shape should be vivid, exaggerated, and atmospheric, which are the characteristics of inflatable products.
2) Processing. Note there should be no dead ends or crinkling. The trace is straight and stitch is uniform, which should not be too dense or too sparse. Being too dense lowers fabric strength, being too sparse will have poor air tightness.
3) Color matching should be harmonious, beautiful, in line with shape characteristics and the habit people enjoy.


Touch: To touch the feel of the material. Good material is soft, smooth and without losing texture. In addition, grab and loosen to see whether there are obvious folds. The material with obvious folds is of poor quality.
Question: Question is to understand the situation, such as what material, composition, thickness, etc. The tensile strength, tear resistance of the material, color fastness, and so on.


5. When you order the product, you should sign the contract. Specify special requirements, price terms, the size of the terms, payment, delivery, mode of transport, after-sales service, which should be clearly written in the contract. Inspect timely according to the contract when cargo arrives at the scene. If you find any problems, you should communicate with the manufacturers as early as possible. Be sure to measure the size and specifications for the products with low offer. This product is very easy to not be able to reach the actual size requirements.


Chinainflatabletoys.com is a professional manufacturing enterprise. Our main products are Inflatable Bouncers, Inflatable Play Ground. Inflatable Slides, Inflatable Combo, Inflatable Obstacles, inflatable Sport game, Inflatable Water Games, Inflatable Tunnels. Inflatable Tent, Inflatable Model, Inflatable Arch, etc. If you are interested in our products, please feel free to contact us!


This article comes from:http://www.chinainflatabletoys.com/news/28.htm ]]> https://ameblo.jp/homefurniture/entry-11561017013.html Wed, 26 Jun 2013 14:57:08 +0900


The inflatable toy is made by polyvinyl chloride (PVC) films via high frequency welding, it presents a variety of shapes after being inflated, so it is also known as the air-filled toy or blowing toys. Its shapes are mostly animals, and there are toys spare tire and other water supplies. The inflatable toy object is mainly infants and young children. When the child is two months after born, you can pick the color inflatable ball hanging in the bed to exercise the child's vision. In addition, you can also choose some exaggerated animal toys for the children to dabble. When the child is one year old, they can choose water toys such as swim ring. It must be noted that the swim ring does not have survival function, which can only be used as toy in the water. So parents must not use swim ring as a life preserver.



The styling choice of inflatable toys



The selection of inflatable toys should meet the children's interest in styles. For the infants within one year old, you should choose bright colors, larger color blocks and sleek shape of toys, such as color ball, ducklings, goldfish, etc. The selection of these animals should pay special attention to the color of their eyes and cute. Other aspects can be omitted. When the child is one year old, you should pick some modeling realistic animals, even terrible animals, which can allow the small children to see the world, cultivate the spirit of being brave. At the selection of inflatable water toys and Inflatable water games, in addition to the swim ring, you can also choose some water animals such as ducks, swans, goldfish, etc.



Tightness check: The key of inflatable toys quality is the seal performance, so the quality inspection is to check whether it leaks or not. First of all, flatten the toys not inflatable, observe whether their prints are clear and beautiful, whether the main parts of the chromatic is accurate, whether there are stains and yellowing on the surface. The weld between each film should be uniform, melting well, there is no wrinkle and pimple or obvious unsoldering. Graze the surface of the film with your fingers, there should have no discoloration. The welds around the gas nozzle should be sealed tight; the plug gas nozzle with gas nozzle should be tight but not too loose. Observe the inflatable toys toward light, there should not have foreign body within the shadows.


　　
The fatal weaknesses of inflatable toys will gradually overcome



After the above checks, you basically can choose a good quality inflatable toy. However, such toys have the shortcomings that the plastic film will age as time goes by, so the film may harden and chronic leak if being placed for a long time, this problem cannot be solved at this stage, with the continuous improvement of the quality of the film, the fatal weaknesses of inflatable toys will gradually overcome.



Chinainflatabletoys.com is an enterprise which integrates design, production, sales professional manufacturing. Our main products are Inflatable Bouncers, Inflatable Play Ground. Inflatable Slides, Inflatable Combo. Inflatable Obstacles, inflatable Sport game, Inflatable Water Games, Inflatable Tunnels. Inflatable Tent, Inflatable Model, Inflatable Arch. Inflatable Christmas Cartoon. PVC Balloon, Air Dancer, Roller Ball, Fur Costume, etc related inflatable products.



If you are interested in our products, please feel free to contact us! ]]> https://ameblo.jp/homefurniture/entry-11559477562.html Mon, 24 Jun 2013 12:20:04 +0900 Chinese LED Industry is Promising

Though China's LED industry is in the doldrums situation, and quarterly report of large LED listed companies is weak and poor, but reporters found that some LED lighting companies are still optimistic about the prospects for the future. Everyone seems to have spotted the direction of the development of the LED market, and also believe that wholesale LED lights is inevitable in the future due to its energy saving, at least LED lights replace the popular energy-saving lamps in the current market is no problem. Moreover, you can also backed by the state financial "big tree".

State Financial Subsidies to LED Industry Development

Early in December 2008, the Ministry of Science and Technology in Beijing launched a nationwide activity that "Ten thousand cities and ten thousand LED lights" of led recessed ceiling lights lighting demonstration project, announced to select 10 cities and promote LED lights more than 10,000 in each city. And investment increment of 30% to 50% of the subsidies in accordance with the LED lighting compared with traditional lighting. Later, the government support the further evidence of the scope of subsidies must not only be limited to the procurement of energy-saving lamps, procurement upstream LED chip production machines are also the scope of subsidies. Industry sources say that only 1 MOVCD machine, government subsidies for three or four hundred million. Under the drive of many interests, many companies have begun to enter the LED industry, In fact, for some enterprises, the confidence in the LED is not more to maintain in the "energy", "quality", but actual available profits. Of these enterprises, there are many who despite strong government relations, technology, talent and market channels but not corporate.

Government Force to Promote LED Lighting

Guangdong Provincial People's Government in May this year issued the, "the issuance of Guangdong Province to promote the use of LED lighting products Implementation Plan" notice of claim within three years of public lighting mandatory universal LED products. The country has strict rules about city road lighting design standards (CJJ45-2006) in control, uniformity, glare value, and the current scientific and technological content of LED lighting products on the domestic market did not meet the requirements. Of course, from the point of view of corporate earnings, strong government support, even if the technical conditions are not ripe, the product cannot be extended to a larger market, and eventually can be sold through government procurement "success" for "profit".

Ledpanel-light.com is a professional manufacturing company of high power LED Panel Light and custom recessed LED down lighting, which always commits to delivering high quality LED lighting and associated products which meet the highest requirements of customers. If you are interested in our items, pls feel feel to visit our page and contact us! ]]> https://ameblo.jp/homefurniture/entry-11555762589.html Wed, 19 Jun 2013 12:44:25 +0900 LED General Lighting Market

According to Strategies Unlimited Statistics, in 2010, the world general lighting market penetration of the HBLED is only 7%, the penetration of backlight, mobile electronic is more than 25%, there is a great room for market growth. It is expected in five years, LED general lighting market penetration is expected to reach 43%. The first wave of the trend to promote large-scale application is LED landscape lighting, the second wave is shopping malls and hotels lighting, and the third application is LED replacement bulbs, the next will be the office and industrial lighting applications, but the advantage of LED in office field not so obvious as in other areas, further price decline will generate significant role in promoting its application in the office area.Wholesale LED lights with middle power have a significant advantage in terms of price, because the lm / $ has brisk performance indicators.

LED Outdoor Lighting

In the LED replacement lamp market, the most prominent is Japanese market, current market penetration rate is about 50%, but now the Japanese market have been some new problems. Because LED has long life, after using the LED replacement bulbs, replacement cycle was significantly lengthened the application of LED lamps, which obviously has a great influence on the subsequent market, and have raised new challenges to the existing channels, distribution, and even the manufacturing sector. LED outdoor lighting applications, it can be said that the most important indicator is the rate of return on investment, the indicators have been reduced from 5-7 years to 2-4 years, this impact on the LED downlights dimmable pioneering in outdoor lighting market is far-reaching.

LED Lighting Prospects are Very Broad

LED lighting in the retail and hotel applications has its specific characteristic, and it puts forward higher requirements in optical quality indicators, such as CRI, different times, and the angle chromatic aberration. LED penetration in the application areas are also increased year by year, only 9% in 2011, is expected to reach 43% in 2015. Office applications have very broad prospects, the penetration is also less optimistic about the field, and the major competitors in the field are LED lamps T5, T8 lamps and other products. LED lighting should have a superior performance in luminous efficiency, color rendering, light quality and light safety.

Ledpanel-light.com is a hi-tech enterprise combining technical research, development, manufacture and marketing. It specializes in researching and manufacturing LED residential and commercial lighting, ranging from LED Downlight, LED Panel Light, LED Tube light and LED Bulb light. Welcome to have a visit to our website!

This article comes from:http://www.soundspeakers.cn/index.php/development-status-of-the-led-market-segments.htm ]]> https://ameblo.jp/homefurniture/entry-11554350765.html Mon, 17 Jun 2013 15:36:13 +0900 Composition of solar lamp



Solar lighting design involves light source, the solar cell system, battery charge and discharge control and many other factors, the problem of any link problems will cause defects in the solar powered lanterns. Solar lamp consists of five parts: solar panels, charge and discharge controller, battery, load and shell lamps.



1. Solar cells



The main function of solar cell is to convert light energy into electrical energy, which is known as the photovoltaic effect. The more common and practical among many solar cells is monocrystalline silicon, polycrystalline silicon and amorphous silicon three kinds of solar cells. In eastern and western regions where are sunny and with good sunshine, it’s better to use polycrystalline silicon solar cells. Because polycrystalline silicon solar cell production process is relatively simple, the price is lower than the single crystal, and the conversion efficiency has been improving. In the southern areas where have more rainy days and the sun is relatively not very abundant, it’s better to use single crystal silicon solar cells as well, because electrical performance parameters of single crystal silicon solar cells is relatively stable. The amorphous silicon solar cells are better in the case of indoor sunlight is weak, because the amorphous silicon solar cells require a relatively low sun light condition.



2. Charge and discharge controller



Regardless of the solar lighting size, the good performance charging and discharging control circuit is essential. To extend battery life, charge and discharge conditions must be limited, to prevent the battery from over charging and deep discharge. In addition, because the input energy of the solar photovoltaic power generation system is unstable, the battery control in photovoltaic power generation system is complex than ordinary battery charging control. For the design of solar lighting kit, the success and failure often depends on the success and failure of charge and discharge control circuit. Without a good performance charging and discharging control circuit, it is impossible to have good performance solar lamps. The charge and discharge controller must have the following characteristics: counter-attack charge control, anti-overcharge control, anti-discharge control, temperature compensation.



3. Battery



As the input energy of the solar photovoltaic power generation system is very unstable, so generally it needs to configure with the battery system to work, solar lamps are no exception, which must be configured with the battery to work. Generally there are lead-acid batteries, Ni-Cd battery and Ni-H batteries, their capacity selection directly impacts on system reliability and system prices. Choice of battery capacity generally follows the following principles: First, to meet the night lighting premise, store the energy of the solar cell components at daytime as far as possible, while store the power needed at the night lighting in the continuous rainy days. If the battery capacity is too small, it cannot meet the needs of the lighting of the night; if the storage capacity is too large, the battery is always in the state of the loss of electricity, which impacts on battery life and is wasteful.



LED-solarlights.com is one of the solar energy enterprises in Shenzhen, China. Our products are mainly LED solar lights, solar home system series, solar mobile chargers and solar Inverter, etc. If you are interested in our products, please feel free to contact us!



This article comes from:http://www.storage-battery.com/index.php/how-to-buy-solar-lighting-products.htm

]]> https://ameblo.jp/homefurniture/entry-11551349392.html Thu, 13 Jun 2013 16:04:18 +0900 T5 LED tube lights are very close to our lives

T5 LED tube lights might have been used in some families, so this product is still very close to our lives. But there are many people really want to understand these products, and today we will introduce about T5 LED fluorescent lamp. LED luminous efficiency can be developed to 50-200 lm / W, good light-emitting monochromatic, narrow spectrum, no need to filter, which can directly send out colored visible light. LED tube t5 light source adopts super bright chip, packaged by low attenuation process, enable white LED to reach zero attenuation in 3000 hours; when the single LED is above 6.5LM, the color rendering index is more than 85%.

Comparison between T5 LED tube and traditional fluorescent
The marketing of any new products is a long and arduous process. Current 15-18 mA fast reflect speed, can be manipulated in high-frequency; used in the case of the same lighting effects, the power consumption of T5 LED tube is only one-third of traditional fluorescent and one-tenth of the ordinary incandescent lamp; a 40 watt fluorescent lamp with the same effect, while the power is only 12 watts using LED, which is 70% more energy saving. Energy conservation is the main reason to consider the use of the LED light source, LED light source is no doubt more expensive than traditional light sources, but translate the annual energy-saving light sources to recover the investment, you will gain several times energy-saving period each year.

T5 taking instead of T8 is the development trend

In the lighting factories produce energy-saving lamps, straight tube is mainly T5 fluorescent; merchants sell and export t5 led tube. So we can see that T5 taking instead of T8 is the development trend, because T5 is much better in luminous efficiency, energy saving function. Note: If your school uses 10000 pieces of 40W ordinary fluorescent tubes (actual power consumption is 46-49 watts plus rectifier), use 12 hours every day, except holidays, count by 300 days a year, how much are the electricity bills? From data, you will be able to recover the cost within a year, and will be able to save more than 360 million electricity within three years. LED responses very fast, which is in the microsecond level.

LED T5 tube light has wide market vision
LED T5 tube light is not only super energy-efficient and more environmentally friendly, and is one of products emphasized to develop by the national green energy-efficient lighting project. It is the major trend product to replace the traditional fluorescent, which has wide market vision. Driven by constant current, over-current protection and good heat treatment make the product function not to be chaos. The road for T5 taking instead of T8 is still long; incandescent is significantly wasting electricity, said to be eliminated for many years, a lot of families still use it. No rectifiers, low voltage, cold light source does not cause a fire, the wire size required is also much lower than the current lighting fixtures used wire specifications. LED single tube power is 0.03-0.06 watts, DC drives, single-tube drive voltage is 3.0-3.5 volts.

www.mlsleds.net is a factory located in Shenzhen, China, since 2006, we devote to designing and manufacturing environment-friendly lower power, long life LED bulbs and lamps to replace the incandescent ones. If you are interested in our products, please feel free to contact us!

This article comes from:http://www.chinaphoneparts.com/index.php/t5-led-tube-introduction.htm
]]> https://ameblo.jp/homefurniture/entry-11546782678.html Fri, 07 Jun 2013 13:39:31 +0900 Composition and function of LED panel lights



LED panel light is a beautiful upscale indoor lighting. Its external border is made of aluminum alloy formed by anodic oxidation, the light source is LED, the entire lighting design is beautiful and simple, luxurious, which has both good lighting, but also brings the feeling of beauty. The design of the LED panel lights is unique. The light after a high transmittance of the light guide plate forms a homogeneous plane glow, the light is soft, comfortable yet bright illumination uniformity, which can effectively alleviate eye fatigue.LED light panels can also be radiation-proof, which does not irritate the skin of pregnant women, the elderly and children.



Comparison between LED panel light and grid lamps



Consider about green lighting design, LED panel light materials are environmental protection, low power consumption, which is better than the grid lamps in luminous efficiency, lighting brightness. It really achieves watch the lights at daytime, and light at night. It is gradually replacing the grille lamps which use T8 fluorescent lamp as the light source. LED panel lamp life is 10 times that of fluorescent lamps.



LED panel lights installation forms



1. Can be embedded in the ceilings, walls and installed surface.
2. Can be hung on the ceiling or beneath the installed body. When embedded in a white ceiling, the entire ceiling is in the same color, which is very beautiful, clean, and coordinate;



LED panel lights are widely favored by customers in Europe and America



LED panel lights adopt broadband voltage design (AC85-240V/50-60Hz), which can be used in countries around the world; high-power LED uses isolated power supplies, constant current or constant current driver, high efficiency power, no pollution to the grid, stable performance, safety and reliable; LED panel lights use a new type of surface light source similar to LCD TV backlight technology, light is soft and appearance is beautiful, which has been widely favored by customers in Europe and America; a large number of foreign tradesmen want to buy led panel lighting products and suppliers with good quality, good service and good price;



Customers' demand on the LED panel light quality is extremely strict
LED panel light is seemingly just a simple lighting model, but its high market position determines the customers’ demand on the quality of this product is extremely strict, coupled with the product itself comes to materials, thermal, optical, structural, hardware, electronics and other fields, it is difficult for most companies to truly successfully develop if they do not have a complete development team and enough experience in the development and subsequent supply chain management capabilities. In addition, because the knowledge of market requirements is not clear, so a lot of development costs invested in it only exchange products that customer does not endorse.



www.mlsleds.net is a factory located in Shenzhen, China, since 2006, we devote to designing and manufacturing environment-friendly lower power, long life LED bulbs and lamps to replace the incandescent ones. If you are interested in our products, please feel free to contact us!



This article comes from:http://www.velcrotape8.com/index.php/led-panel-lights-are-widely-used-around-the-world.htm
]]> https://ameblo.jp/homefurniture/entry-11545429646.html Wed, 05 Jun 2013 15:37:22 +0900
1.Small size
LED is basically a very small chip encapsulated in epoxy resin. So it is very small and light.
2.Low power consumption
LED power consumption is very low. In general, LED's operating voltage is 2-3.6V. The operating current is 0.02-0.03A. That is to say, the electrical energy it consumes is less than 0.1W. Saving energy with zero pollution is environmentally friendly. DC drive, ultra-low power consumption (single tube 0.03-0.06 W), electro-optical power conversion close to 100%. It saves 80% than traditional lighting sources for the same lighting effects.
3.Long service life
Under right current and voltage,led light supplier says that LED lights' service life is up to 100,000 hours. LED light source that some people call the long life lamps, which means the light never goes out. Solid cold light source, epoxy encapsulated, light body with no loose parts. It has no filament light burning, heat deposition, lighting fades or other shortcomings. Its service life is up to 60,000 to 100,000 hours, more than 10 times than traditional light sources’.
4.High brightness, low heat
LED uses cold light technology has lower heat than conventional lighting.
5.Environmentally friendly
LED is made of non-toxic material; unlike fluorescent lamps containing mercury can cause pollution. Besides, LED can also be recycled which is morer environmental. There are no ultraviolet spectra or infrared spectra in lighting; no heat, no radiation, small glare, and recyclable. It has no pollution or mercury elements. LED is cold light source which is safe to touch. It’s a typical green lighting.
6.Durable
LED lighting supplier means that LED is completely encapsulated in epoxy resin. It is more durable than light bulbs and fluorescent tubes. Light body is not loose. Those features make LED durable.
7.More changes
LED light source can use the red, green, and blue color theory to make three colors with 256 gray scales under computer technology control, and then it can make 256 × 256 × 256 = 16777216 colors and form different combinations of light color. LED can produce variety of dynamic changing effects and images.



www.illusion-led.com ILLUSION LED LIMITED, which is a new high-tech enterprise engaged in research, manufacturing and marketing of LED light. The main products involve LED wall washer, LED strip, LED module, LED spotlight, LED street light and LED accessories etc, all of which are widely used for urban lighting decoration, indoor home decoration, hotel decoration, stage lighting, signal lamp, road lighting and other areas.



This article comes from:http://cell.battery-products.com/led-light-manufacturer/the-advantages-of-led-lights.htm
]]> https://ameblo.jp/homefurniture/entry-11544018590.html Mon, 03 Jun 2013 18:01:56 +0900 Silicone products have been used extensively



Using strong adsorption, quickly and effectively absorb moisture inside the sealed package, stable chemically, non-toxic harmless features of silicone products, combined with constant innovation development in recent years, silicone products have been used extensively for drug purification, DNA isolation, dry food, high-precision electronics, cosmetics, the sewage purification, beer purification, and advanced coatings and resin production or preservation. In our daily life and production and business activities,silicone products are often used in the following aspects: drying mould-proof packaging for precision optical instruments, electrical and electronic; leather drying, if placed in leather garments, leather bags, shoes, it will play a drying and preservation role; in food drying, it is commonly placed in biscuits and fried foods, to ensure the food crunchy; for pharmaceutical drying, put in vials, to ensure that the drugs prolong shelf life.



Safety performance of silicone products:



The main ingredient of silicone products is silica, chemically stable, and does not burn. Silicone product is amorphous silica, workshop dust content should be controlled no greater than 10 mg / m 3, need to strengthen the exhaust, wear a mask when operating. Silicone products have strong adsorption capacity, which can produce a drying effect on human skin, therefore, you should wear overalls at the operation. If silicone products go into the eyes, you need to wash with plenty of water and seek medical treatment. Blue silicone products are toxic because they contains a small amount of cobalt chloride, which should be avoided contact with food and inhalation in the mouth, if poisoning occurs, you should immediately seek medical treatment. The adsorption capacity of silica products decreases due to the adsorption of water vapor or other organic substances in the media during use, which can be reused after regeneration.



Application range of silicone products is very wide



The application range of silicone products is very wide, mainly used for the daily necessities, silicone kitchenware, silicone baby products, mobile phone accessories (silicone phone cover, silicone earplugs, silicone mobile phone buttons, silicone electronic accessories). There are many silicone products, silicone wristbands, silicone pad, silicone wallet, silicone bakeware, silicone fruit basket, silicone gloves, silicone ice lattice, silicone bakeware are good choices for home and daily life. Silicone products used in phone silicone sleeve is also very good, silicone mobile phone sets has been one of the main purposes of the silicone products. Silicone products are also used in medical and other aspects, silica products used for medical is mainly body silicone,silicone tube and other silicone products. In addition, silicone products are used for infant products, including silicone baby bottles, silicone nipples, silicone teethers, silicone educational toys, among which the silicone educational toys include silicone puzzles, silicone letters, silicone fruit, etc.



www.silicone-product.net is specialized in making silicon keypads, TPE & TPU products, silicon cases for mobile, various remote controls, earplugs, O-rings, rubber feet, silicone bracelet/wristband, silicone baby series, silicone kitchenware, bake ware, ice tray, silicone sheet, silicone mat, silicone tube/ hose and other rubber products.



This article is come from:http://www.silicone-product.net/News/36.htm ]]> https://ameblo.jp/homefurniture/entry-11539104883.html Mon, 27 May 2013 15:45:03 +0900 Global High-brightness LED Market Overview



According to estimates, the annual growth rate of high-brightness LED market value will be 13.4%, a size of up to $ 10.1 billion; the MOCVD machine demand in 2012 will be substantially reduced to 200, and the LED industry in the first half of the economy will be weaker, and therefore it will be difficult to revert to high growth scenarios for 2010, if the new machine built, the forecast will focus on the second half of 2012 installed. 2012, Japan, South Korea, Taiwan, the high brightness LED market weightings amounting to 61.3%, it can be described as Asia leading the LED industry trends become more apparent. Which, the growth rate of the Chinese mainland in 2012 will reach 30%, the main reason for the large orders previously MOCVD machine will be about 150 Deferred to put into operation in 2012, the contingent is worth nothing that the mainland led spot lighting products will continue to stay in the low power field.



Rapid Development of LED Light Bulb Market



From the rapid development of outdoor led landscape lighting bulb market point of view, the 2012 new LED industry will be replaced by the 60W incandescent, however, we have to notice that the considerable 60W, brightness of 800 lm LED bulb price is still high, it is $ 40 and various districts prices required by the market are not the same, $ 25 in Japan, Europe and the United States is about $ 15, and the emerging area is about $ 7. Therefore, in 2012 the proportion of energy-saving light bulbs are still high, LED bulbs penetration rate will be 5.4%, while the shipment quantity will reach 1.05 billion pieces.



Overall LED Lighting Market



To look at the overall LED lighting market, although the 2011 penetration rate is only 6.6%, but there is potential for future growth. Countries in the development of LED lighting have introduced policies and incentives, which, in 2015, Japan plans accounted for LED general lighting market will reach 50%, and 30% in South Korea, mainland China is 20%, for up to above 2015 target before this few years will be the first up to the short-term tasks; in addition, LED technology continues to progress, given an objective point of view to the U.S. DOE, in 2014 white LED device luminous efficiency will reach 200 lm / W, and the price will drop to about $ 2 / klm, vendor technical processes beyond the above values. Therefore, the global LED lighting market penetration will be 11.3% in 2012, rising to 25.8% in 2014, the output value rose will be up to $ 41.9 billion in 2014 from $ 16.5 billion in 2012.



www.progressive-hk.com is a high-tech company giving priority to environmental protection, energy saving and carbon reduction. We have a series of energy saving technical products such as LED street light, LED city lighting lamps, power generation system of amorphous silicon solar light-gathering. Welcome to have a visit to our website!


For more information about LED Light charger visit our website. ]]> https://ameblo.jp/homefurniture/entry-11535514815.html Wed, 22 May 2013 11:43:15 +0900