riblath12のブログ https://ameblo.jp/riblath12/ ブログの説明を入力します。 ja Self-Furred Diamond Mesh Lath Working Process an Self Furred Metal Lath is made for masonry surfaces with hardened concrete nails and fasteners. Materials used are usually hot dipped galvanized steel sheets. 

Metal lath used over solid surfaces to be furred approximately ? inch away from the wall to allow for the proper stucco keying behind the lath. Self-furred diamond mesh lath has a surface studded in dimples or embossed “V” groove that provide the required ? inch of furring. Fastener placement should be arranged so as not to negate the furring mechanism.

Self-Furred Diamond Mesh Lath is secured to masonry surfaces with hardened concrete nails and power driven fasteners at the furring dimples. Paper backed lath is often used in this type of application as a bond breaker.

Self Furred Metal Lath  Self Furred Metal Lath

 

]]> https://ameblo.jp/riblath12/entry-12436994353.html Fri, 01 Feb 2019 11:08:18 +0900 Welded Wire Lath as Stucco Material for Building Welded wire fabrics can be used in making of metal lathing products. Made from quality galvanized carbon steel wire, welded wire mesh fabrics offer good corrosion resistance and oxidation resistance.
https://www.metalriblath.com/welded_wire_lath.html
Welded Wire Lath should be used as base for gypsum plaster with absorbent paper-backing or slot-perforated separator.
Stucco makes a very good exterior wall finish. It is applied over lath, which can be made of zinc coated, or galvanized metal, galvanized woven wire fabric or galvanized welded wire fabric. These mesh materials allow the stucco to go into the openings and adhere well to become stronger. The wire needs to be galvanized to help protect against rust. Different gauges of wire are available but the most commonly used is eighteen gauge wire.

Mesh opening of welded wire lathing: 3/4", 1/2", 1", 1/4", 3/8".

General wire gauge (BWG): 14# to 23#.

Welded Wire Lath  Welded Wire Lath

]]> https://ameblo.jp/riblath12/entry-12436994259.html Fri, 01 Feb 2019 11:07:51 +0900 Diamond Metal Lath, Expanded Metal Lath Same Fea Diamond Mesh Lath makes excellent plaster base and reinforcement for the following construction uses:
Walls;
Ceilings;
Fireproofing of steel beam, and columns.

Diamond Mesh Lath  Diamond Mesh Lath

Diamond mesh lath is easy to cut and form to ornamental plaster work and it provides ample keying for scratch coat. These features enable diamond mesh lath commonly used for plaster machine application. 
Material: Hot dipped galvanized steel or zinc coated carbon steel.

]]> https://ameblo.jp/riblath12/entry-12436994183.html Fri, 01 Feb 2019 11:07:25 +0900 Flat Rib Lath as One Type Metal Lath Features an Flat Rib Lath is a kind of metal lath that is more rigid than diamond mesh laths.

Flat Rib LathFlat Rib Lath Features: 
More rigid;
Greater stiffness;
Wider spacing;
Easy keying of plaster.

Forms of Using:
Flat rib lath is available in paper-backed in either K (Kraft) paper, or with D paper.

Materials: This kind of rib lath is manufactured from high quality galvanized steel with zinc coating. 
Sizes and specifications can be customized.

]]> https://ameblo.jp/riblath12/entry-12436993965.html Fri, 01 Feb 2019 11:06:09 +0900 Stainless Steel Rib Lath as Expanded Lath and Hi We have announced the introduction of SS304 and SS316 to its industry-leading lath product offering, now enabling architects, contractors and customers of all size and scope to order the maximum protection of stainless steel lath in a cost effective, timely manner. Listed as "Stainless Steel Lath" in the Metal Lath and Accessories catalog, we supply two newest standard lath offerings include: 

https://www.metalriblath.com
SS304
. Available as a product providing an excellent corrosive resistant material for specialty lath applications.
. Product can be used over insulation boards to carry conventional stucco finishes and for external.
insulation requirements.
SS316
. Used for swimming pool applications to provide an additional resistance to pool cleaning chemicals.
. Also used for lathing in coastal locations where atmospheric salt is a concern.

Stainless Steel Lath  Stainless Steel Lath

Size:

Model    Type    Alloy    Sheet size    sheets/bundle
SS1.75    1.75lbs    304 or 316    27?" × 96"    10
SS2.5    2.5lbs    304 or 316    27?" × 96"    10
SS3.4    3.4lbs    304 or 316    27?" × 96"    10

]]> https://ameblo.jp/riblath12/entry-12436993888.html Fri, 01 Feb 2019 11:05:43 +0900 Spray lath is used primarily on the West coast, Spray lath is used primarily on the West coast, where stucco is spray applied to the surface of the lath to build stucco thickness. Rib Lath is often attached directly to the vertical framing members without a solid board substrate included. Spray products are categorized as follows:

Use: For exterior stucco work over sheathing and as a plaster base over masonry walls. Self-furring embossed "V" groove holds the lath away from the surface to aid in the keying of stucco to the lath.

Spray Lath V RibbedSize: 27" × 96" (686mm × 2440mm)

Weights: 3.40lbs/yd2 - (End Painted Red w/ Yellow Stripe)
Installation: Spray Lath - V-Ribbed is intended for applications not requiring a water resistant barrier. The plain kraft paper is applied between V grooves to conserve machine applied stucco and allows visual location of studs during installation.

]]> https://ameblo.jp/riblath12/entry-12436993747.html Fri, 01 Feb 2019 11:05:04 +0900 Paper Back Metal Lath is also Called Diamond Mes Ti lath (Paper Back Metal Lath) is diamond mesh lath, regular or self-furred, to which offset asphalt saturated kraft building paper has been applied. The grade D paper typically used is water resistant, yet highly vapor permeable. Ti lath reduces moisturePaper Back Metal Lath penetration while allowing for the dissipation of moisture vapor from within the structure. A foundation weep screed at the bottom of all framed walls aids in the evacuation of any moisture that might reach the surface of the building paper. (Required by most codes) The offset paper, which is recessed from one end and one side and overhangs on the opposite end and side, allows the applicator to easily install this product correctly as prescribed by ASTM C1063. This specification requires that paper be ship lapped, paper-to-paper and metal-to-metal for proper installation. Ti lath is ideal for use as a base for tile and traditional stucco. The paper backing aids in plaster keying and stucco curing, protection of the sheathing during curing, and provides moderate water resistance. Self-furred Ti lath is provided with "V" groove self-furring mechanisms.

Size:

Model    Type    Sheet size    PCS/BDL    PCS/PLT
PB1.75    1.75lbs    27" × 96"    10    500
PB2.5    2.5lbs    27" × 96"    10    500
PB3.4    3.4lbs    27" × 96"    10    500

]]> https://ameblo.jp/riblath12/entry-12436993628.html Fri, 01 Feb 2019 11:04:31 +0900 Metal Rib Lath for Brickwork Reinforcement Appli mbedded in the normal thickness of a brickwork joint, expanded metal reinforcement reduces the detrimental effects of vibration and changes of temperature. The application gives brickwork increased resistance to tensional stresses. The brickwork reinforcement (coil mesh) assists resistance to tensile stresses where settlement occurs. Easily incorporated into mortar course, coiled for ease of handing.
https://www.metalriblath.com/brickwork_reinforcement.html
Brickwork ReinforcementApplications:

concrete slabbing, roads, paving, foundations, marine work, bank strong rooms, partition slabs, concrete block work, asphalt guttering etc.

Installation:

Fix into mortar between brick courses leaving 25mm clearance from face of brickwork. All joints require an overlap of at least 75mm. The mesh can be laid every third brickwork course for most reinforcement.

Material: 
Galvanized steel, stainless steel.
Width: 65mm, 100mm, 175mm, 225mm, 300mm.
Length: 20m.

Size:

Model    SWD × LWD    Coil width    Length
BR100    15mm × 25mm    100mm    20m
BR150    150mm    20m
BR200    200mm    20m
BR305    300mm    20m

]]> https://ameblo.jp/riblath12/entry-12436993535.html Fri, 01 Feb 2019 11:04:03 +0900 Expanded Metal Lath or Diamond Metal Lath Introd Metal Lath is available in expanded metal lath, self-furred, paper-backed, flat-ribbed, diamond mesh and high ribbed lath. Our metal lath is mainly manufactured from hot dipped galvanized expanded steel sheets.

Enzar Metal small mesh metal lath is ideal as a plaster base and reinforcement for all types of construction-walls, ceilings, ad fireproofing of steel beams ad columns. It is easy to cut and form to ornamental plaster work.

Sizes and types available: The expanded metal lath is available in 1.75, 2.5, and 3.4 pounds per square yard. All expanded metal laths are available in either flat, self-furred (dimpled of grooved), or in combination with paper-backing with D, Double-D, or K paper.

Benefits of Using Expanded Metal Lath:

Stronger finished sheet products with lighter weight;

Suitable for decoration due to the variety of pattern types;

Versatile metal mesh allows light, heat and air through, while retaining its strength forming a very strong barrier for security purposes.

Expanded metal lath  Expanded metal lath

]]> https://ameblo.jp/riblath12/entry-12436993376.html Fri, 01 Feb 2019 11:03:12 +0900 High Ribbed Lath Has High Quality and Security f High Rib Lath has excellent engineering quality and construction security. It is widely used in construction reinforcement of tunnels bridges, valve basement systems, sewage systems, subways, retaining walls, nuclear power plants, shipyards, water pools and marine engineering works and high rise building projects and non-regular or bending pattern as concrete permanent assembly-free formwork lath.

High Rib Lath is produced from galvanized steel expanded metal sheets. It provides longitudinal 3/8" ribs and small inverted ribs, together with a small herringbone mesh offering superior strength and spanning capabilities.High Rib Lath

Specifications and sizes can be customized.

]]> https://ameblo.jp/riblath12/entry-12436993108.html Fri, 01 Feb 2019 11:01:50 +0900