The main thing I focus on first is proper cable preparation, as uneven stripping or damaged strands can cause trouble later .

With a shear bolt connector, I tighten each bolt gradually until it shears off, which tells me the correct torque has been reached.

Some technicians ignore this step and that mistake often shows up during testing or later under load .

The heating process must be controlled, because overheating can damage insulation while low heat leaves gaps.

On outdoor or underground jobs, I take extra care during heating since moisture and temperature affect how the insulation settles around the joint.

With a shear bolt connector, correct sizing and proper insulation decide how well the joint handles load over time.

In indoor panels, the conditions are easier, but in outdoor trenches or underground pits, sealing becomes critical for durability.

After years of cable jointing work, I can say that a properly installed shear bolt connector performs well for a long time .

The main Shear bolt connector thing I focus on first is proper cable preparation, as uneven stripping or damaged strands can cause trouble later .

I have learned on site that forcing one bolt too fast can tilt the connector and create uneven pressure .

Some technicians ignore this step and that mistake often shows up during testing or later under load .

After fitting the shear bolt connector, I usually apply heat shrink sleeves or insulating material as per site practice .

On outdoor or underground jobs, I take extra care during heating since moisture and temperature affect how the insulation settles around the joint.

I have seen common on-site mistakes like using the wrong connector size or skipping insulation checks .

In indoor panels, the conditions are easier, but in outdoor trenches or underground pits, sealing becomes critical for durability.

Real performance on site depends more on installation habits than on the connector itself.